Autonics
Autonics Motion Devices Stepper Motor Drivers AIS SERIES AiS-42MA-B (A2350000696)
- SKU:
- AiS-42MA-B
- Weight:
- 500.00 Grams
Additional Information
Driver_Operation Method: |
Bipolar constant current Drive |
Driver_Applied Motor: |
Frame size 42mm, shaft type, built-in brake type 2-phase closed-loop stepper motor(Ai-M-42SA-B) |
Driver_Resolution: |
500, 1000, 1600, 2000, 3200, 3600, 5000, 6400, 7200, 10000 PPR (selectable by SW2) |
Driver_Power supply: |
24VDC |
Driver_Max. Run Current: |
1.7A/Phase |
Driver_Max. Power consumption: |
60W |
Driver_Output: |
In-Position, Alarm Out, Encoder signal (A, , B, , Z, ) |
Driver_Protection structure: |
IP20 |
Motor_Basic Step Angle [FULL/HALF]: |
1.8º/0.9º |
Motor_Max. Holding Torque: |
4.08kgf.cm |
Motor_Rotor Moment Of Inertia: |
54g·cm² |
Motor_Winding Resistance: |
1.85Ω |
Motor_Rated Current: |
1.7A/Phase |
Motor_Motor length: |
108.3mm |
Motor_Shaft Type: |
Single shaft |
Motor_Operation Method: |
Bipolar constant current Drive |
Motor_Resolution: |
10,000PPR(2,500PPR×4-multiply) |
Motor_Output phase: |
A, , B, , Z, |
Motor_Max. response frequency: |
300kHz |
Motor_Protection structure: |
IP30 |
Motor phase: |
2-Phase |
Driver_Environment_Ambient temperature: |
0 to 50℃, storage: -10 to 60℃ |
Driver_Environment_Ambient humidity: |
35 to 85%RH, storage: 10 to 90%RH |
Driver_Weight: |
Approx. 400g(approx. 290g) |
Motor_Environment_Ambient temperature: |
0 to 50℃, storage: -20 to 70℃ |
Motor_Environment_Ambient humidity: |
20 to 85%RH, storage: 15 to 90%RH |
Motor_Weight: |
Approx. 0.83kg (approx. 0.73kg) |