Controller & Indicator
Controller and Indicator- to sense different signals to control by defined functions
The controller is the mastermind of control systems. The transmitter outputs or signals are transferred to the controller so the controller can make the necessary decisions based on the function defined for it. The controller determines the values of the regulated variables by comparing the measurement signal with the desired value and performing the necessary calculations. The controller input is sensors and transmitters, etc., and the output is the control of valves, motors, etc.
The indicator senses different input signals including voltage, current, RTD, and TC signals through an electrical device and produces visual feedback such as;4-20 mA signals or an active relay to indicate proper operation.
Temperature controllers, humidity controllers, process controllers, Panel Meters, Indicators, Counters, Timers, and Digital Display Units are standard industry indicators and controllers.
You can browse the controller and indicator category on our website to find your applicable instrument. To talk to an expert, get a free consultation, and ask about the controller and indicator instruments price, contact us +9714337738
-
JKN Panel Meters & Controllers Volt Meter & Controller JLC-1
JKN
Water Supply or Water Drainage for controlling conductive liquids under 40 kΩ -
Digital PID Temperature Controller - TC4S-14R
Autonics
Autonics Single Display PID Temperature Controller - TC4S-14R 4-digit 7-segment LED, 1 alarm, Relay + SSR drive As a quick report, this temperature controller provides: Size: DIN W48×H48 mm Display method: 4-digit... -
8-Pin Plug Type Sensor Controllers PA-12 Series
Autonics
Product Overview The PA-12 Series sensor controllers are designed with an 8-pin plug type connection for effortless installation. These controllers offer dual voltage capabilities of 110/220 VAC, making them suitable for a wide range of applications... -
LAE Temperature Controllers AC1-5PS1RW
LAE ELECTRONIC
Main features Runs on universal mains power supply PID with auto tuning or ON/OFF control Main output on 12A relay or for SSR-piloting and auxiliary output on 5A relay Input for 0÷1V, 0/4÷20mA, PTC/NTC10K, TC J/K or... -
Temperature Controller NTC 10K or PTC 1000 Input Sensor, Relay Output - AT2-5BS4E-AG
LAE ELECTRONIC
LEA Refrigeration Controller for HT/LT - AT2-5BS4E-AG Thermostat / Evaporator / Door switch Input, Thermostat / Evaporator fans / Auxiliary Output The AT2-5BS4E-AG by LAE Electronic is a refrigeration controller with a control range... -
Universal Controller PTC / NTC 10K Input, 2 Relays Output - AC1-5TS2RW-B
LAE ELECTRONIC
LEA Two channel universal Controller - AC1-5TS2RW-B PTC/NTC10K Input, 2 Output, Relay, RS485 Serial comm The AC1-5TS2RW-B by LAE Electronic is a controller with a temperature range of -50 to +150°C or -40 to +125°C. The... -
Digital Tachometer DT-2236A
Tecpel
A tachometer (revolution-counter, tach, rev-counter, RPM gauge) is an instrument measuring the rotation speed of a shaft or disk, as in a motor or other machine. The device usually displays the revolutions per minute (RPM)... -
Digital Tachometer ST723
Sentry
ST723 from Sentry is a tachometer that offers accurate capabilities for measuring and recording the rotational, linear and surface speed. The non-contact concept is applied to both models in the series for the hard-to-reach environment. Meanwhile, the... -
Digital Tachometer - ST722
Sentry
A “tachometer” (revolution-counter, tach, rev-counter, RPM gauge) is an instrument measuring the rotation speed of a shaft or disk, as in a motor or other machine. The device usually displays the revolutions per minute (RPM) on a... -
TECPEL Thermometers Temperature & Humidity Datalogger DTM-322
Tecpel
Product Description Features: DTM-322: Temp:-20°C ~ 60°C (-4°F ~ 140°F ); K-type: -200°C ~ 1,370°C (-328°F ~ 2,498°F); Humidity: 0 ~ 100% RH Data Logging capacity 16,000 records. 4... -
Temperature Controller IC sensor Input, Relay Output - SU-105IP
Samwon Eng
Samwon Automatic Control of Temperature - SU105IP 2 Relay output, IC (-50.0°C~150°C) Input sensor, Thermostat The SU105IP from SU-105 series is temperature controllers that produced by Samwon Eng. The input sensor... -
Humidity Controller 0 to 99%RH Input, Relay Output - SU-503BN
Samwon Eng
Samwon Humidity regulator - SU-503BN Honeywell humidity sensor, Main relay (OUT1) output, LOC function The SU-503BN replaces the SU-503B code and the only distinction between this code and SU-503B is the body's color. The humidity...