Communication Converter for Laser Displacement Sensors BD-C Series

Product Overview

The BD-C Series communication converters are designed to facilitate RS232C/RS485 communication for BD Series laser displacement sensors. By utilizing the side connector, these converters can be directly powered by the sensor amplifier unit, eliminating the need for additional wiring. With the atDisplacement software, users can easily perform batch parameter settings, monitor measured values and outputs in real-time, and configure communication speeds and addresses—all without the need to connect to host devices.

Main Features

• Dual Communication SupportThe BD-C Series supports both RS232C and RS485 communication through separate ports, providing flexibility for various applications.
• Expandable ConnectivityConnect up to 8 amplifier units, allowing for efficient and scalable sensor setups.
• Direct Power SupplyThe converters can be powered directly by the amplifier units, simplifying installation and reducing the need for extra wiring.
• Dedicated Device Management Software (atDisplacement)
  • Batch parameter settings with convenient save/load functionality
  • Real-time monitoring of measured values and outputs
  • Set communication speed and addresses using DIP switches, all without needing to connect to host devices.
• Firmware Compatibility NoticePlease note that only BD-C communication converters with firmware version 5.0 or above are compatible with BD-A1 amplifier units running firmware version 5.0 or higher. Ensure your firmware is up to date before use

Supports Dual RS232C and RS485 Communication

Both D-SUB (for RS232C) and terminal (for RS485) ports are available, allowing for independent or simultaneous communication.

Powered Directly by Sensor Amplifier Units

These communication converters can be powered directly by the sensor amplifier unit through the side connector, eliminating the need for extra wiring.

Compatible with atDisplacement Device Management Software

When connected to a PC, the BD-C Series converters support the atDisplacement software, enabling easy parameter configuration for each sensor amplifier unit and real-time monitoring of measured values and output status.

Buy Now