DAT5030IS-BH Temperature Transmitter

General Description

The Dual Channel Hart Compatible intrinsically safe current loop repeater DAT5030ISBH is a DIN Rail mount signal repeater. The input can be either 4-20mA or 0-20mA and the output is ether 0-20mA or 4-20mA. The input can be Active or Passive power supply meaning the excitation voltage can be supplied by the field equipment or the loop can be powered be the DAT5030ISB-Hart. Also the output can either be Active or Passive but with the additional output ranges of 0-10V or 2-10V. There is also an auxiliary power supply of 15 Volts on the input side and an auxiliary power supply of 12 Volt on the output side.

The DAT5030ISBH is accurate to 0.1% full scale and has less than 0.01%/°f thermal drift.

The DAT5030ISBH also provides an isolation of 2000Vac between the input and output signal, and an isolation of 1500Vac between the power supply and the output signal.

This eliminates the effects of any ground loops and allows the use of the transmitter in heavy environmental conditions found in industrial applications. The DAT5030ISBH is in compliance with the standard 89/336/CEE on the Electromagnetic Compatibility.

The DAT5030ISBH is housed in a plastic enclosure of 22.5 mm thickness suitable for DIN rail mounting in compliance with EN-50022 and EN-50035 standards.

INPUT
2 X HART Current 4-20mA, 0-20mA. 

OUTPUT
2 X HART Current 4-20mA, 0-20mA. 
2 X Voltage 0-10V, 0-5V, 2-10V, 1-5V.

POWER SUPPLY
Power Supply Voltage 18-30Vdc 
Reverse polarity protection 60Vdc 

CURRENT CONSUMPTION
80 to 120 mA

CONFIGURATION
DIP Switch Configurable.

ISOLATION
Between Input/Output/Power Supply 2000Vac.

EMC
For Industrial environments
Immunity EN 61000-6-2
Emission EN 6100-6-4

HOUSING
Material self-extinguishing
Dimensions W x H x T
3 1/2" x 4 1/2 " x 1/2"
90 x 112x x 12.5 mm
Weight 3 oz 90 g

TEMPERATURE
Operating Temperature -4°F +140°F -20°C +60°C
Storage Temperature -40°F +185°F-40°C +85°C
Humidity (non condensing) 0-90%

Specifications

Drawings