Head Mount Temperature Transmitter Multiple Input, Current Output - DAT1065

The isolated universal input temperature Transmitter DAT1065 is a hockey puck (head mount) temperature Transmitter with PC programmability. The input can be K-Type Thermocouples, E-Type Thermocouples, J-Type Thermocouples, N-Type Thermocouples, R-Type Thermocouples, S-Type Thermocouples, T-Type Thermocouples.Pt100, Pt1000, Ni100, Ni1000 or mV and potentiometer. The DAT1065 will linearize the temperature input and provide a 4-20mA output signal.

The DAT1065 is isolated between the input and power supply/output to 2000V, eliminates the effects of any ground loops and allows the use of the transmitter in heavy environmental conditions found in industrial applications.

The DAT1065 is accurate to 0.1% full scale and has less than 0.01%/°f thermal drift.

The DAT1065 is programmable by PC based software which has been developed by DATEXEL to be user friendly.

For resistance and RTD's sensors it is possible to program the cable compensation for 3 or 4 wires.

It is possible to set the minimum and maximum values of the input and output ranges in any point of the scale, keeping the minimum span shown in the Data Sheet. Also high burn out alarm or low burn out alarm is selectable.

The DAT1065 is in compliance with the standard 89/336/CEE on the Electromagnetic Compatibility.

The DAT1065 is housed in a self-extinguish plastic enclosure suitable for DIN B in-head mounting.

There is a mounting kit available to mount the DAT1065 on DIN rail.