null
Autonics

Digital Counter / Timer 6 digit, 2 Stage Preset - CT6S-2P2

(No reviews yet) Write a Review
SKU:
CT6S-2P2
Condition:
New
Weight:
220.00 Grams
Minimum Purchase:
1 unit

Description

Autonics Programmable Digital Counter / Timer - CT6S-2P2

6-digit, DIN W 48 × H 48 mm, 7-segment, Relay

 

The Autonics counter CT6S-2P2 is a counter and timer with 6-digit 7-segment LED, 2-stage preset, W 48 x H 48 mm, relay Contact control output and NPN open collector for Solid-state control output.

As a quick report, this counter provides:

  • Available to set 6 digits (0.00001 to 999999) prescale value
  • Method of operation:

             Counter: Count up, Count down, Count up/down

             Timer: Count up, Count down

  • Terminal block
  • Power supply: 24 VAC ~ 50/60 Hz, 24-48 VDC
  • IP65 (front part, IEC standard) ingress protection
  • 2-stage preset control output
  • 2 SPDT (1c) control output relay
  • NPN open collector control output: 1
  • Time operation: POWER ON START, SIGNAL ON START
  • Signal Input Method: Voltage input (PNP), No-voltage input (NPN)
  • Counting range: -99999 to 999999

Control output

SIGNAL ON DELAY, POWER ON DELAY, FLICKER, INTERVAL, SIGNAL OFF DELAY, ON-OFF DELAY, INTEGRATION TIME are the output operations for the CT6S-2P2.

Temperature

There are limitations in temperature and humidity in which CT6S-2P2 counter is used:

  • Storage temperature: -25 … 65°C
  • Storage humidity: 35 to 85%RH
  • Ambient temperature: -10 … 55°C
  • Ambient humidity: 35 to 85%RH

Environment resistance is rated at no freezing or condensation.

Industries / applications

  • Rubber Extrusion / Plastic Injection Molding Process

 

Click on the following link to view other Autonics counter products.

Series Information

CT Series

Programmable Digital Counter/Timers

The Autonics CT series digital counter/timers are integrated units with functions of counters and timers. The units feature various input/output operation modes and load contact capacity up to 5A for flexible application in diverse industries. The RS485 models allow remote parameter configuration and monitoring via PCs. The CT series is available in 4-digit and 6-digit models in 3 standard DIN sizes (48 × 48, 72 × 72, 72 x 36 mm).

CT Series Main features

  • Integrated counter/timer unit for counting and timing applications
  • RS485 (Modbus RTU) communication (communication models)
  • One-shot output time: 0.01s to 99.99s

Counter Functions

  • Various input/output modes (9 input modes, 11 output modes)
  • Prescale value range

    - 6-digit models: 0.00001 to 99999.9
    - 4-digit models: 0.001 to 999.9

  • Batch counting function, set count starting point (value) function

Timer Functions

  • Various output modes (11 output modes)
  • Time setting range

    - 6-digit models: 0.001sec to 99999.9hr
    - 4-digit models: 0.001sec to 9999hr

  • Set output time to 0 supported
  • Timer memory function (indicator models only)

About Autonics counter

“Autonics” is a leading provider of automation solutions from South Korea. Autonics products are trusted and adopted by engineers in various industrial applications and their technology is widely applied in day-to-day automation devices. This company represents 8 counter series:

  • CX Series: LCD Display Counter/Timers
  • LA8N Series: Compact 8-Digit LCD Digital Counters (Indicator Only)
  • CT Series: Programmable Digital Counter/Timers
  • FXY Series: Digital Counter/Timer Indicators (Indicator Only)
  • FXS Series: Compact Digital Counter/Timers
  • FXM/FXH Series: Standard Digital Counter/Timers
  • FS Series: 8-Pin Plug Type Digital Counters
  • FM Series: Digital Measure Counters

Autonics products are mainly used in:

  • Machine Tools Industry
  • Plastics/Rubber Industry

Documents

You may want to read this product's catalog. If so, please click to view the CT6S-2P2 datasheet.
View AllClose

Warranty Information

One Year Warranty
View AllClose

Additional Information

Digits:
6.
Digit size:
Single preset 10mm.
Digit size.:
Single preset 7mm.
Power supply:
Single preset 100-240VAC 50/60Hz
Power supply.:
Single preset 24VAC 50/60Hz/24-48VDC.
Allowable voltage range:
90 to 110% of voltage rated.
Power consumption:
Single preset Max. 12VA.
Power consumption.:
Single preset AC max. 10VA/DC Max: 8W
INA/INB max. counting speed:
Selectable 1cps/30 cps/5k cps/10k cps.
Min. input signal width:
Counter Reset signal. Selectable 1ms, 20ms.
Min. input signal width.:
Timer INA, INB RESET: Selectable 1ms, 20ms.
Input:
Selectable Voltage input or No-voltage input. [Voltage input] input impedance is 5.4KΩ, ‘H’ level: 5-30VDC, ‘L’ level 0-2VDC. [No-voltage input] short-circuit impedance Max. 1kΩ, residual voltage, Max.2VDC.
One-shot output:
Count, timer: Selectable 0.01s to 99.99s.
Control output:
Without com. Contact output Dual preset: SPST (1a) 2EA. Single preset: SPDT (1c) 1EA.
Control output:
Without com. Solid-state output Dual preset: 1NPN open collector. Single preset: 1NPN open collector.
Control output.:
Without com. Contact output Dual preset: SPST (1a) 2EA. Single preset: SPDT (1c) 1EA.
Control output..:
Without com. Solid-state output ----.
Control output...:
Without com. Contact output 250VAC, 5A resistive load.
Control output:
Without com. Solid-state output 30VDC Max. 100mA max.
External sensor power:
12VDC ±10%, 100mA max.
Memory retention:
10 years (when using non-volatile semiconductor memory type).
Timer:
Repeat error Power ON start: Max ±0.1 0.01%, 0.05s. Signal start: Max ±0.01%, ±0.03s.
Timer.:
SET error Power ON start: Max ±0.1 0.01%, 0.05s. Signal start: Max ±0.01%, ±0.03s.
Timer..:
Voltage error Power ON start: Max ±0.1 0.01%, 0.05s. Signal start: Max ±0.01%, ±0.03s.
Timer...:
Temp. error Power ON start: Max ±0.1 0.01%, 0.05s. Signal start: Max ±0.01%, ±0.03s.
Insulation resistance:
100MΩ (at 500VDC megger).
Dielectric strength:
2000VAC 50/60Hz for 1 min.
Noise strength:
±2KV the square wave noise (pulse width: 1µs) by the noise simulator.
Vibration:
Mechanical 0.75mm Amp. at freq. 0f 10-55Hz (for 1min.) in each X, Y, Z directions for 1 hour.
Vibration.:
Malfunction 0.5mm Amp. at freq. 0f 10-55Hz (for 1min.) in each X, Y, Z directions for 10 min.
Shock:
Mechanical 300m/s2 (approx. 30G) in each X, Y, Z directions for 3 times.
Shock.:
Malfunction 100m/s2 (approx. 10G) in each X, Y, Z directions for 3 times.
Relay life cycle:
Mechanical Min. 10,000,000 operations.
Relay life cycle.:
Electrical Min. 100,000 operations.
Protection:
IP65 (front panel only).
Environment:
Ambient temp. -10~55â—¦C, storage -25~65â—¦C.
Environment.:
Ambient humidity 35-85% HR, storage: 35-85% HR.
Approval:
CE.
Unit weight:
Approx. 159g.
Communication Specifications:
none
Protocol:
Mobus RTU (16 bit CRC).
Connection method:
RS485.
Application standard:
Compliance with EIA RS485.
No. of connections:
31, it is available to set address 1 to 127.
Communication method:
Half duplex.
Synchronous method:
Asynchronous.
Communication distance:
Within max. 800M.
Communication speed:
2,400, 4,800, 9,600, 19,200, 38,400bps (Factory default: 9600bps).
Response waiting time:
5-99ms (factory default: 20ms).
Start bit:
1 bit (fixed).
Data bit:
8 bits (fixed).
Parity bit:
None, even, odd (factory default: none).
Stop bit:
1, 2 bit (factory default: 2 bit).
View AllClose

Related Products

Autonics Counter & Timer Counters CT6M-2P2

Autonics Counter & Timer Counters CT6M-2P2

Autonics

    The CT series digital counter/timers from Autonics are integrated units with functions of counters and timers. The units feature various input/output operation modes and load contact...
Autonics Counter & Timer Counters CT6S-1P4T

Autonics Counter & Timer Counters CT6S-1P4T

Autonics

The CT series digital counter/timers from Autonics are integrated units with functions of counters and timers. The units feature various input/output operation modes and load contact capacity up to...