null
Autonics

Fork Sensor 5 mm Sensing Distance, NPN Open Collector - BS5-K2M

(No reviews yet) Write a Review
SKU:
BS5-K2M
MPN:
BS5-K2M
Weight:
30.00 Grams
Minimum Purchase:
1 unit

Description

Autonics Groove-Depth 9 mm Photomicro Sensor - BS5-K2M

Through-beam type, Connector type connection, Infrared LED

 

The Autonics photomicro sensor BS5-K2M is Through-beam sensing type, comes in 9mm groove depth, sensing distance of 5mm, Response time of Light ON: Max. 20㎲ / Dark ON: Max. 100㎲. The standard fork photo sensor can be used in diverse applications requiring non-contact detection of Opaque material.

This fork sensor also encapsulates an adequate sensing target and very suitable response time. This product has wide range of applications due to its strong built and fulfill a long list of engineering requirements. With being made from high end materials, it is considered as a wise buying choice.

As a quick report, this photomicro sensor provides:

  • Through-beam sensing type
  • Hysteresis(distance): ≤0.05mm
  • 5mm sensing distance
  • Opaque material of min. ≥Ø0.8mm×2mm sensing target
  • Infrared LED Light source
  • 5-24VDC ±10% (ripple P-P : max. 10%) power supply
  • NPN Open collector control output
  • Operation mode:Light ON/Dark ON (set by control wire)
  • 940nm Peak emission wavelength
  • Red LED Operation indicator
  • Reverse power polarity protection circuit, output short overcurrent protection circuit
  • IP50 ingress protection structure according to IEC standards

Body

This Autonics photomicro sensor's case is made of PBT, its sensing part is made of PC.

The BS5-K2M features IP50 ingress protection.

The red LED on its body acts as the Operation indicator.

Connection

The Autonics sensor BS5-K2M features connector type connection.

Sensing specifications

The sensing target for this photomicro sensor is Opaque material of min. ≥Ø0.8mm×2mm. The maximum distance that this sensor can detect its standard sensing target is 5mm. This so-called sensing distance differs from one sensing target to another, based on their material.

Control output

The BS5-K2M features NPN open collector control output.

Temperature

There are limitations in temperature and humidity in which BS5-K2M photomicro sensor is used:

  • Storage temperature: -25 … 85°C
  • Storage humidity: 35 to 85%RH
  • Ambient temperature: -20 … 55°C
  • Ambient humidity: 35 to 85%RH

Environment resistance is rated at no freezing or condensation.

Industries / Applications

  • PCB Transport Lines
  • Milling Machines
  • Laser Marking on Semiconductor Parts
  • Mobile LCD Manufacturing

 

Still want to know more? Click here to find out about Autonics Photomicro Sensors working principles.

Series Information

BS5 Series

Groove-Depth 9mm Photomicro Sensors

The Autonics BS5 series photomicro sensors are available in 8 different shapes (K, T, V, L, Y, F, R, TA types), offering maximum flexibility for various user applications and installation settings. The sensors are designed to minimize errors occurring from foreign substances. The sensors offer high visibility with operation indicators viewable from multiple directions.

BS5 Series Main features:

  • Various shapes available for installation flexibility (K, T, V, L, Y, F, R, TA types)
  • Minimize detection errors and improved visibility
          - Sensing side and body level has been improved to minimize detection errors occurring from foreign substances
          - Added operation indicators viewable from multiple directions
  • Indicator ON when light received and indicator ON when light blocked models available
  • High shock and vibration resistance
          - shock: 15,000 m/s² (approx. 1,500G), vibration: 10 to 2,000 Hz (1.5 amplitude)
  • Switch between Light ON and Dark ON modes using control terminal/wire
  • High-speed response frequency: 2kHz

About Autonics Photomicro Sensors

"Autonics" is a leading provider of automation solutions from South Korea. Autonics products are trusted and adopted by engineers in various industrial applications and their technology is widely applied in day-to-day automation devices. This company represents 4 Photomicro Sensors series:

  • BS4 Series: Groove-Depth 9 mm Photomicro Sensors with Built-In Connector
  • BS3 Series: Groove-Depth 6.5mm Photomicro Sensors
  • BS5 Series: Groove-Depth 9mm Photomicro Sensors
  • BS5-P Series: Push Button Type Photomicro Sensors

Autonics Photomicro Sensors are mainly used in:

  • Semiconductor/Display Industry
  • Machine Tools Industry

Documents

You may be interested to see this product's catalog. If so, please click to view the BS5-K2M datasheet.
View AllClose

Warranty Information

One Year Warranty
View AllClose

Additional Information

Sensing type:
Through-beam
Sensing Distance:
Fixed 5mm.
Sensing target:
Opaque materials of min. ≥ 0.8 mm × 2 mm
Hysteresis:
0.05mm.
Response time:
Max. 1ms.
Power supply.:
5-24VDC ±10% (Ripple P-P: Max 10%).
Current consumption:
Max. 30mA (at 26.4 VDC).
Control output NPN open-collector output ::
Load voltage: max. 30VDC. Load current: max. 200mA. Residual voltage: max. 1.2VDC.
Operation mode:
Selectable light ON/dark ON by control wire.
Operation Indicator:
Red LED.
Connection:
Connector type.
Light-emitting element:
Red
Light receiving element:
Photo TR
Noise strength:
The square wave noise by noise simulator (Voltage ±240V. period 10ms. Pulse width 1µs).
Dielectric strength:
500VAC 50/60 Hz for 1 min.
Insulation resistance:
Min 20MΩ (500VDC mega).
Vibration:
1.5mm amplitude at a frequency of 10~55Hz in each of X, Y, Z directions for 2 hours.
Shock:
500m/s2 (50G) in X, Y, Z direction for 3 times.
Ambient humidity:
35~85 RH.
Storage humidity:
35~85 RH.
Ambient illumination:
Fluorescent lamp: max. 1000lux.
Ambient temperature:
-20~+55â—¦C (at non-freezing Status).
Storage temperature:
-25~+85â—¦C.
Protection:
IP50 (IEC standard).
Material:
PA-6.
Cable:
5P, Ø6mm, length: 2m.
Unit weight:
Approx. 30g.
View AllClose

Related Products