Datexel Isolated Module 8 Digital inputs and 8 Digital Outputs on Modbus RTU - DAT10188

Modbus RTU/ Modbus ASCII protocol, 8 digital inputs, 8 digital outputs, CE mark, DIN rail mounting - High Quality

The device DAT10188 is able to acquire up to 8 digital inputs with connection NPN or PNP and to drive up to 8 digital outputs type PNP transistor. The data are transmitted with MODBUS RTU / MODBUS ASCII protocol over the RS-485 network.

To ensure the plant safety, a Watch-Dog timer alarm is provided.

The isolation between the parts of circuit removes eventual ground-loop effects, allowing the use of the device even in the heavy environmental conditions.

The device is housed in a 6 module DIN rough self-extinguishing plastic box for mounting on EN-50022 standard DIN rail.

COMMUNICATION PROTOCOLS

The device is designed to work with the MODBUS RTU/MODBUS ASCII protocol: standard protocol in field-bus; allows to directly interface DAT10000 series

devices to the larger part of PLCs and SCADA applications available on the market.

The advantages and features for Datexel Isolated Module DAT10188

• Modbus Slave device on RS-485
• Modbus RTU/ Modbus ASCII protocol
• 8 digital inputs
• 8 digital outputs type PNP transistor
• Communication parameters configurable by dip-switches
• Watch-Dog Alarm
• Remotely Configurable
• 1500 Vac 3-ways Galvanic Isolation
• LEDs of signaling on front side for power supply and communication
• LEDs of signaling on front side for digital inputs and outputs state
• Connection by removable screw terminals
• High Accuracy
• CE mark
• DIN rail mounting in compliance with EN-50022

Input Datexel Isolated Module DAT10188

• Channels 8 Voltage input (bipolar)
• OFF State 0 ÷ 3 V
• ON State 10 ÷ 30 V
• Impedance 4.7 KW
• Sample time 5 ms

OUTPUT Datexel Isolated Module DAT10188

• Channels 8
• Type PNP
• Voltage 10.5÷30 Vdc

Data Transmission (RS-485 asynchronous serial)

• Baud Rate 115.2 Kbps
• Max. distance 1.2 Km – 4000 ft

Power Supply

• Power supply voltage (**) 10 ÷ 30 Vdc
• Reverse polarity protection 60 Vdc max

Current consumption

• 50 mA max@24Vdc, 110 mA max@10Vdc

ISOLATION

• Among all ways 1500 Vac, 50 Hz, 1 min

ENVIRONMENTAL CONDITIONS

• Operative Temperature -10°C .. +60°C
• Storage Temperature -40°C.. +85°C
• Humidity (not condensed) 0 .. 90 %
• Maximum Altitude 2000 m
• Installation Indoor
• Category of installation II
• Pollution Degree 2

MECHANICAL SPECIFICATIONS

• Material Self-extinguish plastic
• IP Code IP20
• Wiring wires with diameter 0.8÷2.1 mm2 /AWG 14-18
• Tightening Torque 0.5 N m
• Mounting in compliance with DIN rail standard EN-50022
• Weight about 200 g

Electromagnetic Compatibility (EMC)

• (for industrial environments) Immunity: EN 61000-6-2; Emission: EN 61000-6-4