Datexel Isolated Module CANopen Slave device digital inputs and outputs - DAT7130

CAN open protocol, 8 digital inputs, 4 relay outputs, EMC compliance – CE Mark - High Quality

The device DAT 7130 is able to acquire up to 8 digital inputs and to drive up to 4 relay outputs. The data are transmitted by the CANopen protocol.

The 2000 Vac galvanic isolation between inputs, outputs, power supply and data line eliminates the effects of all ground loops eventually existing and allows the use of the device in heavy environmental conditions found in industrial applications.

The DAT 7130 is housed in a rough self-extinguishing plastic enclosure of 22.5 mm thickness, suitable for DIN rail mounting in compliance with the EN 50022 standard.

COMMUNICATION PROTOCOLS

On the DAT7000 modules the following communication protocol is implemented:

CANopen Protocol: one of the most used standard communication protocol; it allows to interface the modules of DAT7000 series directly to the CAN Controllers that accept devices in compliance with the CiA DS 301 and CiA DS 401 standards. For communication setting, refer to the User manual.

The advantages and features for Datexel Isolated Module DAT7130

Field Bus data acquisition

• CANopen protocol
• Baud rate and ID Node programmable by dip-switch
• 8 digital inputs
• 4 relay outputs (2 SPDT + 2 SPST)
• Led of signaling for inputs and outputs status
• Four ways 2000 Vac galvanic isolation
• EMC compliance – CE Mark
• In compliance to EN-50022 DIN rail mounting
• Digital for Datexel Isolated Module DAT7148

Digital Inputs Datexel Isolated Module DAT7130

• Channels 8
• Input voltage (bipolar)
• OFF State 0 ÷ 3 V
• ON State 10 ÷ 30 V
• N° of counters 8 @ 300 Hz
• Min. Pulse width 1 ms
• Impedance 4.7 KW

Digital Outputs

• Channels 4
• Type n° 2 SPDT relays
• n° 2 SPST N.O. relays
• Switching power (max.) 2 A @ 250 Vac ( resistive load ) per contact, 2 A @ 30 Vdc ( resistive load ) per contact
• Minimum load 5Vdc , 10mA
• Max.voltage 250 Vac (50 / 60 Hz) , 110Vdc

Sample time

• 5 ms

Data Transmission

• Baud rate up to 1 Mbps
• Max. Distance in function of the Baud rate

Power Supply

• Supply Voltage 18 ÷ 30 Vdc
• Current consumption 70 mA @ 24 Vdc
• Polarity inverted protection 60 Vdc max

Isolation

• Input/ Output 2000 Vac, 50 Hz, 1min.

Environmental Conditions

• Operative Temperature -10°C .. +60°C
• Storage Temperature -40°C.. +85°C
• Humidity (not condensed) 0 .. 90 %
• Maximum Altitude 2000 m
• Installation Indoor
• Category of installation II
• Pollution Degree 2

Mechanical specifications

• Material Self-extinguish plastic
• IP Code IP20
• Wiring wires with diameter 0.8÷2.1 mm2 /AWG 14-18
• Tightening Torque 0.8 N m
• Mounting in compliance with DIN rail standard EN-50022
• Weight about 150 g

EMC ( for industrial environments )

• Immunity EN 61000-6-2, Emission EN 61000-6-4