Datexel Isolated Module CANopen Slave Device Voltage and Current Input - DAT7015

Supports CAN open protocol, 2000 Vac galvanic isolation, EMC compliance, CE Mark – Strong and Italian

The device DAT 7015 is able to acquire up to 4 voltage signals up to ± 10 V or current signals up to ± 20 mA. The data are transmitted by the CANopen protocol.

By means of 16 bit converters, the device guarantees high accuracy and a stable measure both versus time and temperature.

The 2000 Vac galvanic isolation between inputs, power supply and data line eliminates the effects of all ground loops eventually existing and allows the use of the device in heavy environmental conditions found in industrial applications.

The DAT 7015 is housed in a rough self-extinguishing plastic enclosure of 22.5 mm thickness, suitable for DIN rail mounting in compliance with the EN 50022 standard.

COMMUNICATION PROTOCOLS

On the DAT7000 modules the following communication protocol is implemented:

CANopen Protocol: one of the most used standard communication protocol; it allows to interface the modules of DAT7000 series directly to the CAN Controllers that accept devices in compliance with the CiA DS 301 and CiA DS 401 standards. For communication setting, refer to the User manual.

Datexel Isolated Module DAT7015 comes with following features:

• Field Bus data acquisition
• CAN open protocol
• Baud rate and ID Node programmable by dip-switch
• Configurable input for V and mA
• Four ways 2000 Vac galvanic isolation
• EMC compliance – CE Mark
• In compliance with EN-50022 DIN rail mounting

Input for Datexel Isolated Module DAT7015

• Voltage Volt - 10 V +10 V
• Current mA -20 mA +20 mA

Data Transmission

• Baud rate up to 1 Mbps
• Max. Distance in function of the Baud rate

Power Supply

• Supply Voltage 10 .. 30 Vdc
• Current consumption 45 mA @ 24 Vdc
• Polarity inversion protection 60 Vdc max

Isolation Voltage

• 2000 Vac 50 Hz, 1 min. (Inputs/Can Network/Power supply)

EMC (for industrial environments)

• Immunity EN 61000-6-2
• Emission EN 61000-6-4

Environmental Conditions

• Operative Temperature -10°C .. +60°C
• Storage Temperature -40°C.. +85°C
• Humidity (not condensed) 0 .. 90 %
• Maximum Altitude 2000 m
• Installation Indoor
• Category of installation II
• Pollution Degree 2

Mechanical specifications

• Material Self-extinguish plastic
• IP Code IP20
• Wiring wires with diameter 0.8÷2.1 mm2 /AWG 14-18
• Tightening Torque 0.8 N m
• Mounting in compliance with DIN rail standard EN-50022
• Weight about 150 g.