Isolated Module Modbus RTU or Modbus TCP master - DAT9000-2.0

Datexel Isolated Module Modbus RTU or Modbus TCP master - DAT9000-2.0

EMC compliance – CE mark, Remotely programmable, Galvanic Isolation – Great Quality

The device DAT9000 is an Intelligent unit able to control a network of slave Modbus RTU devices connected on serial line RS-485 Master or Modbus TCP through the Ethernet interface executing the reading and writing of the field values and performing the logical and mathematical functions necessary for the system working.

By means of the Ethernet interface or the RS-485 “SLAVE” or uUSB ports it is possible to read and write, in real time, the internal registers value.

The supplied CVPROG cable allows you to configure / program the device without using an external power supply.

Moreover, by means of the Ethernet interface, or by the RS-485 “SLAVE” or uUSB ports it is possible to:

- Programming of the Control Logic

- Monitor, request of data, programming in real time the Intelligent Unit

- Direct programming and request of data from the Slave devices connected to the RS-485 Master.

The device DAT9000 is configurable by the software DEV9K 2.0 and successive versions developed by DATEXEL and running under Windows.

The device DAT9000 realizes a full electrical isolation between the lines, introducing a valid protection against the effects of all ground loops eventually existing in industrial applications.

LED signaling of Ethernet activity and data Rx-Tx flow on the serial line allows a direct monitoring of the system functionality.

The connection is made by removable screw-terminals (supply and RS-485) and RJ45 plug (Ethernet).

The device is housed in a rough self-extinguishing plastic enclosure which, thanks to its thin profile of 22.5 mm only, allows a high density mounting on EN50022 standard DIN rail.

The advantages and features for Datexel Isolated Module DAT9000-2.0:

• N.1 serial interface RS-485 Modbus RTU Master
• N.1 serial interface RS-485/uUSB Modbus RTU Slave
• Interface Ethernet 10/100 Base-T, Modbus TCP Client/Server
• Master both on RS-485 (Modbus RTU) and on Ethernet (Modbus TCP)
• Programming software with "flow chart" structure
• Remotely programmable
• Connection by removable screw-terminals
• Programmable without external sources via uUSB and CVPROG cable
• LED signaling for Link/Act Ethernet, serial RX-TX, power supply
• Galvanic Isolation on all the ways
• EMC compliance – CE mark
• Suitable for DIN rail mounting in compliance with EN-50022 standard

Network interface Ethernet 10/100Base-T for Datexel Isolated Module DAT9000-2.0

• Protocol Modbus TCP
• IP Table Size max 8 devices (IP)
• Socket Modbus TCP 16 (port 502)
• Socket HTTP 3 (port 80)

RS485 Interface

• Baud-rate up to 115.2 Kbps
• Max. distance (1) 1,2 Km @ 115.2 Kbps
• Protocol Modbus RTU
• Number of modules in multipoint up to 32
• Power supply 10 ÷ 30 Vdc
• Current consumption 45 mA typ. @ 24Vdc (standby) 100 mA max

Isolations

• Power supply / Ethernet 1500 Vac, 50 Hz, 1 min.
• Power supply / RS485 1500 Vac, 50 Hz, 1 min.
• Ethernet / RS485 1500 Vac, 50 Hz, 1 min.

Connections

• Ethernet RJ-45 (on terminals side)
• uUSB micro-B (up front)
• RS-485 / Supply Removable screw terminals

Environmental Conditions

• Operative temperature -20 ÷ +60 °C
• Storage temperature -40 ÷ +85 °C
• Relative humidity (not cond.) 0 ÷ 90 %
• Maximum Altitude 2000 m
• Installation Indoor
• Category of installation II
• Pollution Degree 2

Mechanical Specifications

• Material Self-extinguish plastic
• IP Code IP20
• Wiring wires with diameter 0.8÷2.1 mm2 /AWG 14-18
• Tightening Torque 0.8 N m
• Mounting in compliance with DIN rail standard EN-50022
• Dimensions in mm.(WxHxT) 100 x 120 x 22.5
• Weight about 160 g

EMC (for industrial environments)

• Immunity EN 61000-6-2
• Emission EN 61000-6-4