Description
Product Overview
The DAT2105 2W is a sophisticated transmitter engineered to convert voltage signals from a potentiometer input into a 4 to 20 mA current loop signal. This device is designed to deliver exceptional precision and maintain stable measurements over time, even under varying temperature conditions. It is an ideal solution for applications requiring reliable and accurate signal transmission from potentiometers.
Please note that the product photo may not accurately represent the actual item. Always refer to the datasheet during installation to ensure proper setup and compliance with safety standards.
Key Features
High Precision Potentiometer Input
The DAT2105 2W is designed to handle potentiometers up to 50 kΩ, ensuring accurate signal conversion and transmission.
Loop Powered Output
This transmitter operates on a 4 ÷ 20 mA loop-powered output, providing a consistent and reliable signal for your system.
Superior Accuracy
With an accuracy of ± 0.05% full scale, the DAT2105 2W ensures precise readings, critical for sensitive applications.
Burn-Out Alarm Functionality
To enhance operational reliability, the transmitter includes a burn-out alarm feature, which can be set to trigger either a high or low overrange signal.
Adjustable Output Signal
For systems requiring manual adjustment, the optional "- POT" version comes equipped with potentiometers on the front, allowing easy tuning of the output signal.
Compact DIN Rail Mounting
The device is housed in a 12.5 mm thick self-extinguishing plastic case, making it suitable for DIN rail mounting compliant with EN-50022 and EN-50035 standards.
Robust Environmental Resistance
The DAT2105 2W is built to operate within a wide temperature range, from -20°C to +70°C, and is resistant to humidity levels up to 90% (non-condensing).
Environmental and Mechanical Specifications
Operating and Storage Conditions
- Operating Temperature: -20°C to +70°C
- Storage Temperature: -40°C to +85°C
- Humidity: 0 to 90% (non-condensing)
- Altitude: Maximum 2000 meters
Mechanical Build
- Material: Self-extinguishing plastic
- IP Code: IP20, ensuring basic protection against dust and touch
- Wiring Compatibility: Accepts wires with diameters from 0.8 to 2.1 mm² (AWG 14-18)
- Mounting Compatibility: DIN rail standards EN-50022 and EN-50035
- Weight: Approximately 90 grams
Certifications and Compliance
The DAT2105 2W meets stringent international standards, ensuring it is suitable for industrial environments:
- EMC Compliance:
- Immunity: EN 61000-6-2
- Emission: EN 61000-6-4
- UKCA Certification:
- Immunity: BS EN 61000-6-2
- Emission: BS EN 61000-6-4
These certifications underscore the product's reliability and performance in demanding environments.
Installation Guidelines
For optimal performance, the DAT2105 2W should be installed vertically on a DIN rail in locations free from excessive vibrations. It is also recommended to avoid routing the wiring near power signal cables to prevent potential interference.
Documents
You may want to read this product's catalog. If so, please click to view the Datexel DAT2105 2W series datasheet.Additional Information
Input Type: |
Potentiometer, nominal value < 50 kΩ |
Input Accuracy: |
± 0.05% full scale |
Output Type: |
4 ÷ 20 mA loop powered |
Output Resolution: |
± 7 μA |
Burn-out Values: |
Max 21.7 mA, Min 2.2 mA |
Response Time: |
Approximately 220 ms (10 ÷ 90%) |
Power Supply: |
7 ÷ 32 VDC |
Reverse Polarity Protection: |
Up to 60 VDC |
Mounting: |
DIN rail compliant with EN-50022 and EN-50035 |
Storage Temperature: |
-40°C to +85°C |
Humidity: |
0 to 90% non-condensing |
Weight: |
90 grams |