Datexel Modbus TCP Digital IO module Digital Output - DAT8130

Digital Input, Digital Output, Highly Accurate

The device DAT8130 is a Modbus TCP server unit with 8 digital input channels and 4 relay outputs type SPDT.

For the digital inputs are available up to four 32 bit counters with measure of frequency up to 300 Hz.

The Ethernet interface allows to read and write in real time the value of device's internal registers.

The built-in Web Server allows the remote visualization and acquisition of the digital inputs state, to drive the relay outputs and access to and configure the main Ethernet parameters via web browser.

The device is also configurable by the software Dev9K, a free IDE developed by DATEXEL.

The device realizes a full electrical isolation between the lines, introducing a valid protection against the effects of all ground loops eventually existing in industrial applications.

The LEDs of signaling of Ethernet activity, input, output state and power supply allow a direct monitoring of the system functionality. The connection is made by removable screw-terminals (inputs, outputs and power supply) and RJ45 plug (Ethernet).

The device is housed in a rough self-extinguishing plastic enclosure which, thanks to its thin profile of 22.5 mm only, allows a high density mounting on EN-50022 standard DIN rail.

The advantages and features for signal conditioner DAT8130:

• Interface Ethernet 10/100 Base-T, Modbus TCP Server
• N.8 Digital inputs
• N.4 Relay outputs (SPDT)
• Built-in Web server to acquire the digital inputs state and drive the digital outputs via web browser
• Remotely programmable
• Connection by removable screw-terminals
• LED signaling for Link/Act Ethernet, power supply
• LED signaling for digital inputs and outputs state
• Galvanic isolation on all the ways
• CE mark
• In compliance to EN-50022 DIN rail mounting

Input

• DIGITAL INPUTS 8 Channels

Output

• DIGITAL OUTPUTS 4 channels
• Type: SPDT relay

Response time (10÷ 90%)

• about 400 ms

POWER SUPPLY

• Power supply voltage 10 .. 30 Vdc
• Reverse polarity protection 60 Vdc max
• Current Consumption 290 mA max

ENVIRONMENTAL CONDITIONS

• Operative Temperature -10°C .. +60°C
• Storage Temperature -40°C .. +85°C
• Humidity (not condensed) 0 .. 90 %
• Maximum Altitude 2000 m
• Installation Indoor
• Category of installation II
• Pollution Degree 2

MECHANICAL SPECIFICATIONS

• Material Self-extinguish plastic
• IP Code IP20
• Wiring wires with diameter 0.8÷2.1 mm2 /AWG 14-18
• Tightening Torque 0.5 N m
• Mounting in compliance with DIN rail standard EN-50022
• Weight about 190 g