Name: Programmable digital indicator Input signal 4 - 20 mA - DAT8050
Brand: Datexel
SKU: DAT-8050
Availability: OutOfStock

Programmable digital indicator Input signal 4 - 20 mA - DAT8050

(No reviews yet) Write a Review

SKU:

DAT-8050

MPN:

DAT-8050

Weight:

100.00 Grams

Minimum Purchase:

1 unit

Description
Warranty Information
Additional Information

Description

Datexel Loop powered 4 digit LED programmable digital indicator DAT 8050

Programmable, Accurate display, Italian made

The digital panel indicator DAT 8050 accept on the input a 4 - 20 mA current loop signal.

The input current signal is used to supply the device introducing a 5 Vdc voltage drop-out on the current loop, so is not required any external supply source.

The user can program the visualization of the measure in the range from -1999 up to 9999 points in order to set the values of the physical or electrical
parameter transmitted on the current loop in the desired format.

The programming of the visualization is made by the buttons “SET” and “ENTER” located on the front side of the instrument. By use of them, it is possible to
program the values to be visualized correspondent to 4 mA and 20 mA and the position of the decimal point.

It is possible to program the device on field.

When the measured current is lower than 3.8 mA, the display will show the message " Lo "; in the same way, when the current measured is higher than 20.2
mA, the display will show the message " Hi ".

Nearby the display it is possible to apply the desired engineering unit using the adhesive labels supplied with the device.

The instrument set-up is particularly simple and cheap: the fixing system on panel (screw terminal type) and the program (by buttons), allow a quickly and
economic installation.

The DAT 8050 unit is housed into a strong plastic enclosure of 48 x 96 x 74 mm in according to the standard DIN43700.

Following are the great features of DAT8050:

4÷20 mA loop powered
Voltage Drop-out < 5V
High accuracy and linearity
0.52" LED display
Visualization configurable on the front side
Connections on removable screw terminals
Compact case size (DIN 48 x 96 mm)
In compliance with EMC standards - CE mark

INPUT for DAT8050 Datexel in 25 C and nominal environment

Input signal 4 - 20 mA
Voltage drop-out < 5 V
Limitation current < 50 mA

DISPLAY

In normal industrial environment the specification for DAT8050 is as follows here:

Type of visualization: 4 digits LED
Digit height: 0.52 "
Range of visualization (*): programmable on the front side, from "-1999" up to"9999",
with decimal point setting
Minimum measurable current: 3.8 mA (visualization " Lo " in case of lower measure)
Maximum measurable current: 20.2 mA (visualization " Hi " in case of higher measure)

CHARACTERISTICS AND PERFORMANCES

In DAT8050 you can find the specification regarding its performance and precision as bellow:

Reading accuracy: the better than ± 0.05 % of f.s. or ± 1 digit.
Resolution: 4 uA
Response time: < 0.5 sec.
Thermal drift: ± 100 ppm/°C
Operating temperature: -20 ÷ 60 °C
Storage temperature: -40 ÷ 85 °C
Relative Humidity: (not condensing) 0 ÷ 90%
Mechanical dimensions: 48 x 96 x 74 mm
Maximum Altitude: 2000 m
Installation: Indoor
Category of installation: II
Pollution: Degree 2
Weight: approx. 100 g

Mechanical Specifications

Material: Self-extinguishing plastic NORYL (UL94-V0)
IP Code: IP20
Wiring wires with diameter: 0.8÷2.1 mm2 /AWG 14-18
Tightening Torque: 0.8 N m
Mounting: on Panel
Electromagnetic Compatibility (EMC) Immunity: EN 61000-6-2
(for industrial environments) Emission: EN 61000-6-4

Industries/applications

Furnace
Oil and gas
Brick manufacturing
Heat Exchangers
Industrial Processes
Heating/cooling systems

Series Information

Digital indicators for panel mounting DAT9550, DAT8050 and “DAT700 SERIES”

The series is composed of devices dedicated to process and temperature measurement.

The DAT9550 is graphic display size 48 x 96 mm communicating on RS-485 with MODBUS RTU protocol.
The DAT8050 is a programmable digital indicator for current loop size 48x96 mm with 4 digit LED visualization.
The DAT700 series is composed of devices size 36x72 mm (DAT701, DAT702, DAT733. DAT734, DAT735).

About Datexel:

Founded in 1992 from the commitment and aspiration of several partners as a small provincial company, through the years DATEXEL has become an established reality on Italian and international markets as a manufacturer of electronic equipment for industrial automation and control process.

The range of DATEXEL products includes: Transmitters, signal and temperature Converters (both analogue and digital), galvanic Isolators, signal Splitters, I/O Modules, Trip Amplifiers, Power Supply Units, current loop Isolators, analogue and digital Displays.

Documents

To View Data Sheet for Datexel Loop powered 4 digit LED programmable digital indicator DAT 8050 Please Click Here

View AllClose

Warranty Information

One Year Warranty.

View AllClose

Additional Information

Input:	Input signal 4 - 20 mA, Voltage drop-out < 5 V, Limitation current < 50 mA
Display:	Type of visualization 4 digits LED, Digit height 0.52 ", Range of visualization(*) programmable on the front side, from "-1999" up to"9999"
Minimum measurable current:	3.8 mA (visualization "Lo" in case of lower measure).
Maximum measurable current:	20.2 mA (visualization "Hi" in case of higher measure).
Characteristics and Performance:	none
Reading Accuracy:	Better than ± 0.05 % of f.s. or ± 1 digit.
Resolution:	4uA.
Response time:	<0.5s.
Thermal drift:	100 ppm/°C.
Operating temperature:	-20 ÷ 60 °C.
Storage temperature:	-40 ÷ 85 °C.
Mechanical dimensions:	48 x 96 x 74 mm.
Maximum Altitude:	2000 m.
Installation:	Indoor.
Category of installation:	II.
Pollution degree:	2.
Weight:	Approx 100g.
Mechanical specifications:	none
Material:	Self-extinguishing plastic NORYL (UL94-V0).
IP code:	IP20.
Wiring:	Wires with diameter 0.8÷2.1 mm2 /AWG 14-18.
Tightening torque:	0.8 Nm.
Mounting:	On panel.
Electromagnetic Compatibility ( EMC, for industrial environments ):	Immunity: EN 61000-6-2 Emission: EN 61000-6-4