Name: RS485 Modbus Remote Display Programmable - DAT9550
Brand: Datexel
SKU: DAT 9550
Availability: OutOfStock

RS485 Modbus Remote Display Programmable - DAT9550

(No reviews yet) Write a Review

SKU:

DAT 9550

Weight:

160.00 Grams

Description
Warranty Information
Additional Information

Description

Datexel RS485 Modbus Remote Display Programmable - DAT9550

Compact, Programmable, Italian Made

The device DAT 9550 is a graphic display designed for panel mounting and communicating with Modbus RTU protocol on RS-485 and RS-232 serial Slave port.

Moreover, on the device there is a RS-485 Master port by means of which it is possible to communicate with the eventual Modbus Slave devices connected.

It can be used as Slave peripheral for the visualization of the data coming from the Intelligent Units of the DAT9000 series or from a PC, PLC or panel operator.

By means of the Slave serial ports it is possible to configure, by software Dev9K, the graphic pages.

The device is equipped with buttons on the front panel by which it is possible to:

- set the communication parameters of the device such as baud-rate and Modbus address;

- set the levels of brightness and contrast of the display;

- set the values of the local variables selected from the user;

- scroll between the graphic pages.

The implementation of the device is easy and immediate: it must be fixed to the panel by screw terminals; for the connection on the rear side are used removable screw terminals to connect the RS-485 serial ports and the power supply; to connect the RS-232 port it is available a RJ45 connector.

It is housed into a robust plastic enclosure of 96 x 48 x 74 mm in compliance with the DIN43700 standard.

The advantages for Remote Display DAT9550:

Graphic display 132x32 pixels
RS-485/RS-232 Modbus-RTU Slave Interface
RS-485 Modbus-RTU Master Interface
Remotely programmable
Connection by removable screw-terminals (power supply & RS-485)and RJ45 (RS-232)
Compact enclosure dimensions (DIN 48 x 96 mm)
Galvanic Isolation on all the ways
EMC compliance – CE mark
Suitable for panel mounting in compliance with DIN 43700

RS485 Interface for Remote Display DAT9550

Baud-rate up to 38.4 Kbps
Max. distance 1.2 Km @ 38.4 Kbps (recommended) (1)
Internal termination resistance (optional) 120 Ohm

Display Remote Display DAT9550

Graphic Area 132x32 pixels
13.2 * 48.1 mm

Power supply 10 ÷ 30 Vdc

Current consumption 45 mA typ. @ 24Vdc (standby,max. brightness) 80 mA max

Isolations

Power supply / RS485 Slave 1500 Vac, 50 Hz, 1 min
Power supply / RS485 Master 1500 Vac, 50 Hz, 1 min
RS485 Slave / RS485 Master 1500 Vac, 50 Hz, 1 min

Connections

RS-232D RJ-45
RS-485 / Supply Removable screw terminal blocks

Environmental Conditions

Operative Temperature -20°C .. +60°C
Storage Temperature -30°C.. +80°C
Humidity (not condensed) 0 .. 90 %
Maximum Altitude 2000 m
Installationb
Category of installation II
Pollution Degree 2

Mechanical specifications

Material NORYL self-extinguishing plastic
IP Code IP20
Wiring wires with diameter 0.8÷2.1 mm2 /AWG 14-18
Tightening Torque 0.8 N m
Mounting Panel mounting
Dimensions in mm. (W x H x T) 96 x 48 x 74
Weight about 160 g

Industries/applications

Furnace
Oil and gas
Brick manufacturing
Heat Exchangers
Industrial Processes
Heating/cooling systems

Series Information

Digital indicators for panel mounting DAT9550, DAT8050 and “DAT700 SERIES”

The series is composed of devices dedicated to process and temperature measurement.

The DAT9550 is graphic display size 48 x 96 mm communicating on RS-485 with MODBUS RTU protocol.
The DAT8050 is a programmable digital indicator for current loop size 48x96 mm with 4 digit LED visualization.
The DAT700 series is composed of devices size 36x72 mm (DAT701, DAT702, DAT733. DAT734, DAT735).

About Datexel:

Founded in 1992 from the commitment and aspiration of several partners as a small provincial company, through the years DATEXEL has become an established reality on Italian and international markets as a manufacturer of electronic equipment for industrial automation and control process.

The range of DATEXEL products includes: Transmitters, signal and temperature Converters (both analogue and digital), galvanic Isolators, signal Splitters, I/O Modules, Trip Amplifiers, Power Supply Units, current loop Isolators, analogue and digital Displays.

In July 2006, there was the conformation of products to the RoHs Directive Standard (2002/95/EC) which enforces restrictions on the use of unsafe substances for the engineering of electric and electronic equipment.

Documents

To View Data Sheet for Datexel RS485 Modbus Remote Display Programmable DAT9550 Please Click Here

View AllClose

Warranty Information

One Year Warranty

View AllClose

Additional Information

Digital Display:	132 X 32 Pixels.
Communication:	N/A
RS485:	Port 1 Modbus RTU Master, Port 0 Modbus RTU Slave
RS232:	Serial Slave Port.
Power Supply:	Voltage 10 - 30 Vdc. Reverse polarity protection 60 Vdc.
Current Consumption:	80 mA max.
Temperature rating:	Operative Temperature -4°F +140°F -20°C +60°C Storage Temperature -40°F +185°F -40°C +85°C
Humidity:	(none condensing) 0-90%.
Housing:	Material self-extinguishing
Dimensions:	W x L x H 4 x 4 3/4 x 1inch, 100 x 120 x 22.5mm
Weight:	7 oz 200 g
EMC:	For industrial environments.
Immunity:	EN 61000-6-2
Emission:	EN 61000-6-4
Isolation:	1500Vac, 50Hz, 1 Minute
Configuration:	PC Configurable, Front Panel Switches