Datexel Signal Converter, DC Voltage Input, Current Output - DAT5023/V

AC/DC Input, Current Output, Highly Accurate – Italian Made

The converter DAT 5023/V is designed to measure the TRMS value of the AC voltage signal or to convert the DC voltage signal applied on its input in a voltage or current output signal.

The user can program the input type and output ranges by the proper DIP-switches available after opening the suitable door located on the side of device (see “Input type table” and “Output ranges table” sections).

The regulation of Zero and Span values is made by the ZERO and SPAN potentiometers located on the top of device.

The 1500 Vac isolation between input, power supply and output eliminates the effects of all ground loops eventually existing and allows the use of the converter in heavy environmental conditions found in industrial applications.

The DAT 5023/V provides on the output side an auxiliary supply source to connect both active and passive loads.

It is housed in a plastic enclosure of 12.5 mm thickness suitable for DIN rail mounting in according to EN-50022 and EN-50035 standards.

The advantages and features for signal conditioner DAT5023/V:

• Input for AC/DC voltage signal
• Dedicated measure inputs
• Input type of measure ( AC / DC ) configurable by DIP-switches
• True Root Mean Square (TRMS) measure
• Isolated power supply source for passive loads on output
• Voltage or current output configurable by DIP-switches
• Galvanic isolation at 1500 Vac between input, power supply and output
• Good accuracy and performance stability
• EMC compliant – CE mark
• DIN rail mounting in compliance with EN-50022 and EN-50035

Input

• Voltage input (AC) Voltage input (DC)
• Bandwidth (-3dB): 40 Hz ÷ 1KHz

Output

• Signal type (configurable) Current: 4 ÷ 20 mA, 0 ÷ 20 mA, Voltage: 0÷10 V, 2÷10 V, 0÷5 V, 1÷5 V

Performances

• Calibration error ± 0.1 % of f.s.
• Linearity error (*) AC: ± 1 % of f.s; DC: ± 0.1 % of f.s.
• Thermal drift 0.02 % of f.s./°C
• Response time (from 10 to 90 % of f.s.) AC: 250 ms, DC: 20 ms
• Power supply voltage (**) 18÷30 Vdc
• Current consumption (***) Current output: 80 mA max.
• Voltage output: 50 mA max.
• Electromagnetic Compatibility (EMC) (for industrial environment) Immunity: EN 61000-6-2; Emission: EN 61000-6-4
• Isolation voltage 2000 Vac, 50 Hz, 1 min.
• Operating temperature -20 ÷ 60 °C
• Storage temperature - 40 ÷ 85 °C
• Relative humidity (non cond.) 0 ÷ 90%
• Maximum Altitude 2000 m
• Installation Indoor
• Category of installation II
• Pollution Degree 2
• Weight approx. 90 g

Mechanical Specifications

• Material Self-extinguish plastic
• IP Code IP20
• Wiring wires with diameter 0.8÷2.1 mm2 /AWG 14-18
• Tightening Torque 0.8 N m
• Mounting in compliance with DIN rail standard EN-50022 and EN-50035