Description

Datexel Signal Converter, PTC and NTC sensors and potentiometers Input - DAT4631-C

Name: Signal Converter, PTC and NTC sensors and potentiometers Input - DAT4631-C
Brand: Datexel
SKU: DAT4631-C
Availability: OutOfStock

PTC and NTC sensors and potentiometers Input, current or voltage Output, Highly Accurate – High Quality

The isolated double/converter DAT 4631 C is able to measure and linearise the standard PTC and NTC sensors and potentiometers. In function of programming, the measured values are converted in a current or voltage signal. The device guarantees high accuracy and performances stability both versus time and temperature.

The programming is made by the dip-switch located in the window on the side of the enclosure. By means of dip-switches it is possible to select the input type and range and the output type without recalibrate the device.

Moreover, by Personal Computer the user can program all of the device's parameters for his own necessity; the configuration by PC allows to program the two outputs with two independent settings.

Moreover, it is available the option of alarm for signal interruption (burn-out) that allows to set the output value as high or low out of scale.

The 1500 Vac galvanic isolation on all ways (input, outputs and power supply) eliminates the effects of all ground loops eventually existing and allows the use of the converter in heavy environmental conditions found in industrial applications.

The DAT 4631 C is in compliance with the Directive UL 61010-1 for US market and with the Directive CSA C22.2 No 61010-1 for the Canadian market.

It is housed in a plastic enclosure of 12.5 mm thickness suitable for DIN rail mounting in compliance with EN-50022 and EN-50035 standards.

The advantages and features for signal conditioner DAT4631-C:

Configurable input for PTC, NTC and Pot.
Double output configurable in current or voltage
Configurable by dip-switch or PC
High accuracy
On-field reconfigurable
Galvanic isolation among the ways
UL / CE mark
Suitable for DIN rail mounting in compliance with EN-50022 and EN-50035

Input

PTC, NTC, Potentiometer

Output

Current 0 mA 20 mA
Voltage 0 V 10 V

POWER SUPPLY

Power supply voltage 18 .. 30 Vdc
Reverse polarity protection 60 Vdc max

Current consumption

Current output 55 mA max.
Voltage output 25 mA max.

ENVIRONMENTAL CONDITIONS

Operative Temperature -20°C .. +60°C
UL Operative Temperature -10°C .. +60°C
Storage Temperature -40°C.. +85°C
Humidity (not condensed) 0 .. 90 %
Maximum Altitude 2000 m
Installation Indoor
Category of installation II
Pollution Degree 2

MECHANICAL SPECIFICATIONS

Material Self-extinguish plastic
IP Code IP20
Wiring wires with diameter 0.8÷2.1 mm2 /AWG 14-18
Tightening Torque 0.8 N m
Mounting in compliance with DIN rail standard EN-50022 and EN-50035
Weight about 90 g.

CERTIFICATIONS

EMC (for industrial environments)
Immunity EN 61000-6-2
Emission EN 61000-6-4

Series Information

Temperature and signal converters “SLIM SERIES”

The line of converters “SLIM series” has been designed to provide to the user the highest flexibility in the signals conversion.

The series is composed of:

Converters for universal input with double output and trip amplifier (DAT4530)
Single channel converters dedicated for typology of input (DAT4531)
Double channel converters (two independent inputs and outputs) dedicated for typology of input (DAT4532)
Signal splitters dedicated for typology of input (DAT4631)
Mathematical modules (DAT4632D)
Frequency converters (DAT4540)

It is possible to program the devices either via dip-switches to set the most common input and output ranges or via Personal Computer using the software DATESOFT by which the user can personalize the input and output ranges for his own necessities.

About Datexel:

Founded in 1992 from the commitment and aspiration of several partners as a small provincial company, through the years DATEXEL has become an established reality on Italian and international markets as a manufacturer of electronic equipment for industrial automation and control process.

The range of DATEXEL products includes: Transmitters, signal and temperature Converters (both analogue and digital), galvanic Isolators, signal Splitters, I/O Modules, Trip Amplifiers, Power Supply Units, current loop Isolators, analogue and digital Displays.

Documents

To View Data Sheet for Datexel Signal Converter, PTC and NTC sensors and potentiometers Input - DAT4631-C Please Click Here

View AllClose

Warranty Information

One Year Warranty

View AllClose

Additional Information

Input:	Thermistor positive temperature coefficient KTY81-210, KTY81-220, KTY84-130, KTY84-150. negative temperature coefficient Coster 10 K and Coster 1K. Potentiometer 0-50 K ohms, See Data sheet for range
Output:	2 X 4-20mA, 0-20mA, 0-10V
Power Supply:	18 to 30 Vdc. Reverse polarity protection 60 Vdc
Current Consumption:	Current output 35 mA max. Voltage output 25 mA max
Temperature rating:	Operative -4°F +158°F -20°C +70°C Temperature Storage Temperature -40°F +185°F -40°C +85°C
Humidity:	(non condensing) 0-90%
Housing:	Material self-extinguishing
Dimensions::	3 1/2" x 4 1/2 " x 1/2", 90 x 112x x 12.5 mm
Weight:	90 g
EMC:	For industrial environments. Immunity: EN 61000-6-2. Emission: EN 61000-6-4
Configuration:	PC Configurable and DIP Switch Configurable