null
Datexel

Temperature Transmitter 2 Wire RTD Input, Current Output Head Mounting - DAT1010 OEM

(No reviews yet) Write a Review
SKU:
DAT 1010 OEM
Weight:
5.00 Grams
  • Temperature Transmitter 2 Wire RTD Input, Current Output Head Mounting - DAT1010 OEM
  • Temperature Transmitter 2 Wire RTD Input, Current Output Head Mounting - DAT1010 OEM

Description

Datexel Temperature Transmitter 2 Wire RTD Input, Current Output Head Mounting - DAT1010 OEM

Current loop Output, Configurable by PC, Highly Accurate – made in Italy

The compact transmitter DAT1010-OEM is able to execute many functions such as: measure and linearisation of the temperature characteristic of RTDs sensors, conversion of a linear resistance variation and conversion of a voltage signal.

The measured values are converted in a 4÷20 mA current signal. The device guarantees high accuracy and performances stability both in time and in temperature.

The programming of the DAT1010-OEM is made by a Personal Computer using the software PROSOFT, developed by DATEXEL, that runs under the operative system "WindowsTM ".

By use of PROSOFT, it is possible to configure the transmitter to interface it with the most used sensors.

In case of sensors with a no-standard output characteristic, it is possible to execute, via software, a "Custom" linearisation (per step) to obtain an output linearized signal.

For Resistance and RTDs sensors it is possible to program the cable compensation with 3 or 4 wires.

It is possible to set the minimum and maximum values of input and output ranges in any point of the scale, keeping the minimum span shown in the table below.

Moreover, it is available the option of alarm for signal interruption (burn-out) that allows to set the output value as high or low out of scale.

On the device is provided the function “Damping” that allows the user to set a programmable filter up to 30 seconds to reduce eventual sudden variations of the input signal.

The transmitter is designed to be mounted inside a cylindrical probe sensor.

The advantages and features for Temperature Transmitter DAT1010 OEM:

  • Configurable input for RTD, mV and Resistance
  • 4 ÷ 20 mA configurable output on current loop
  • Configurable by Personal Computer
  • High accuracy
  • On-field reconfigurable
  • EMC compliant – CE mark with EN-50022 and EN-50035

Input for Temperature Transmitter DAT1010 OEM

  • RTD (2, 3 wires) Pt100, Pt1000, Ni100, Ni1000
  • Voltage (mV)
  • RES. (2, 3, 4) wires

Output

For Temperature Transmitter DAT1010 OEM is as listed below:

  • Current 4 mA 20 mA
  • Reverse current 20 mA 4 mA

Response time (10÷ 90%)

  • about 400 ms

 

Power supply

  • Power supply voltage 10 .. 32 Vdc
  • Reverse polarity protection 60 Vdc max

Temperature & humidity

Temperature & humidity limits for this model is as follows:

  • Operative temperature -40°C .. +85°C
  • Storage temperature -40°C .. +85°C
  • Humidity (not condensed) 0 .. 90 %

Size and weight

  • Dimensions L = 40 mm ; H = 15.8 mm
  • Weight about 5 g

CERTIFICATIONS

EMC (for industrial environments)

  • Immunity EN 61000-6-2
  • Emission EN 61000-6-4

 

Series Information

“DAT1000 SERIES”: temperature transmitters for DIN B in-head mounting

The transmitters of the DAT1000 series can accept at their input signals coming from 2,3 or 4 wires Pt100, thermocouple and potentiometer sensors or voltage signals (mV).The devices provide a 4÷20 mA two wire current loop output signal.
The series is composed of devices with input configurable by PC with or without galvanic isolation. Moreover, it is available a version of the transmitters of the DAT1000 series developed for the use in potentially explosive atmospheres certified in according to the DIRECTIVE ATEX 94/9/EC. (see p. 24 to 26).


DAT 1010: Two wire transmitter for RTD programmable by PC
DAT 1015: Two wire universal transmitter programmable by PC
DAT 1061: Isolated two wire Transmitter for RTD programmable by PC
DAT 1066: Isolated two wire universal transmitter programmable by PC

Founded in 1992 from the commitment and aspiration of several partners as a small provincial company, through the years DATEXEL has become an established reality on Italian and international markets as a manufacturer of electronic equipment for industrial automation and control process.

The range of DATEXEL products includes:  Transmitters, signal and temperature Converters (both analogue and digital), galvanic Isolators, signal Splitters, I/O Modules, Trip Amplifiers, Power Supply Units, current loop Isolators, analogue and digital Displays.

Datexel Products are used in following industries:

  • Steel production
  • Automotive
  • Oil and gas
  • Shipbuilding

About Datexel:

Founded in 1992 from the commitment and aspiration of several partners as a small provincial company, through the years DATEXEL has become an established reality on Italian and international markets as a manufacturer of electronic equipment for industrial automation and control process.

The range of DATEXEL products includes: Transmitters, signal and temperature Converters (both analogue and digital), galvanic Isolators, signal Splitters, I/O Modules, Trip Amplifiers, Power Supply Units, current loop Isolators, analogue and digital Displays.

Documents

To View Data Sheet for Temperature Transmitter 2 Wire RTD Input, Current Output Head Mounting - DAT1010 OEM Please Click Here

 

View AllClose

Warranty Information

One Year Warranty
View AllClose

Additional Information

Input:
RTD (2, 3 wires) Pt100, Pt1000, Ni100, Ni1000 Voltage (mV) RES. (2, 3, 4) wires
Output:
Current 4 mA 20 mA Reverse current 20 mA 4 mA
Power Supply:
Power supply voltage 10 .. 32 Vdc Reverse polarity protection 60 Vdc max
Temperature rating:
Operative temperature -40°C .. +85°C Storage temperature -40°C .. +85°C
Humidity:
(non condensing) 0-90%
Housing:
Material self-extinguishing
Dimensions:
Length 1 1/2 " Width 12" 41 mm X 15mm
Weight:
5 g
Configuration:
PC Configurable
View AllClose

Related Products